How to start up the roller press pelletizer for the first time

Date:2020/07/17

As an organic fertilizer machine, roller press pelletizer is frequently used in fertilizer industry and other industrial fields. So how to turn on the new device?

Operation method for initial startup

1. Before starting up, the granulator machine should be warmed up for about forty or fifty minutes. Raise the temperature to pull the motor V-belt by hand until it is free; pull it continuously for eight to ten times according to the normal working direction. Then keep heating for about 10 minutes, and then start the machine, but keep heating, because of the normal production demand, continuously compensate for heat; according to different properties of plastics, different temperatures are scheduled.

2. During the normal operation of the roller press granulator, the temperature of the machine should be kept stable, and it should not be suddenly high or low. The vent hole is close to each other until the temperature of the machine head is about 200 ℃.

3. The feeding of roller press pelletizer should be even and sufficient. The feeding speed and feeding speed should cooperate properly. Otherwise, it will affect the quality and yield of particles.

4. When the roller granulator is shut down, the power supply should be completely blocked. It is necessary to take off the screw plug (with spanner). Warm up alone before the next use.

Pre:Is the extrusion granulator suitable for granulation of organic compound fertilizers?

Next:Application of granulation and extrusion in chemical industry

Send Inquiry

Products
Tel
contact
inquiry