Hydraulic Compost Turning Machine in organic fertilizer machine
Date:2021/03/15
The raw materials of organic fertilizer need to be reproduced after fermentation. Some materials are not fully fermented and the moisture is not balanced, which will also cause certain damage to the organic fertilizer machine. For example: when the raw materials are not fully fermented, the moisture is too large, etc. The first thing that is damaged in the granulation process is the blade of the fertilizer crusher and the NPK and organic fertilizer granulator, which will significantly reduce the yield. Each set of organic fertilizer equipment has an approved workload, please do not overload it during use.
Fermentation equipment in organic fertilizer equipment----Hydraulic Compost Turning Machine
The Hydraulic Compost Turning Machine is suitable for trough aerobic composting of organic solid wastes such as livestock manure, sludge garbage, straw and so on. The machine's walking system adopts frequency conversion speed regulation, good adaptability to different materials, stable operation, high stacking efficiency, and deep trough operation, which effectively shortens the fermentation cycle, improves production efficiency and product quality. Adopt frequency conversion speed regulation speed walking system, which can adapt well to the change of work load. The walking speed can be flexibly adjusted according to the resistance of the material, making the equipment more adaptable and flexible. Optional shifting vehicles can be used to realize the use of multi-tank equipment. If the capacity of the equipment permits, only need to build a fermentation tank to expand the scale of production and increase the value of the equipment.
The price of small-size chain plate turning and polishing machine is between 60000-100000 (the specific quotation depends on the specific situation of each manufacturer, and the price is for reference only).
Double roller press granulator, belong to the extrusion slip model, its working principle is: the motor drive the belt and pulley, transfer to the drive shaft through the speed reducer, through the open gear synchronously with the driven shaft, the double rollers rotate in the opposite direction. The raw material input through the feed hopper, and after the extrusion molding, demoulding granulating, through a chain transfer to crushing and screening, after separating , the finished granules come out, and the powder will be back to the mixer, for granulation again. With the continuous rotation of the motor, the continuous input of material, to achieve mass production.